What Is A Channel Drain?

There are always a variety of drainage systems available to function to protect your house from any damages caused by the pooling water. This article will provide some info on one of such drainage systems — channel drain. What is a channel drain? Channel Drains are meant for commercial or industrial use, but you can also apply in residential homes. Here’s more information about it.

what is a channel drain
Table of Contents

    What Is A Channel Drain?

    A channel drain is a type of pump or drain that has multiple channels (also known as trenches). It uses water flow to help push out any excess water. They come in various forms, but one example is where they are functioning in driveways and roads to prevent flooding during heavy rainstorms. You can find it at home by digging into your backyard or front yard. Channel drains are also commonly seen alongside curbs along the edge of highways and streets to prevent road erosion. This process by which it works is fairly simple once you understand how it works, so let us carefully consider what a channel drain does before we proceed further.

    Where Can I Use Channel Drain In My House?

    The most common use for small residential homes is to use it in the landscaping of your backyard. It can also be used either inside or outside your home to prevent flooding. However, there’re other drain pumps that are more commonly available for inside use. If you plan on installing this at home, it’d be better that you hire a professional to do this. It would be a truth especially if it is around your pool area. When water flows down, the channel drains will help prevent any excess water from slowing down or stopping the flow of rainwater into your yard.

    Benefits Of Channel Drain

    1. Prevents flooding inside your house during heavy rainfall.

    2. Helps water flow maintain a steady speed to prevent erosion.

    3. Protects the foundation of your home by preventing pooling around the foundations of your house.

    4. Protects surrounding areas from pooling, which can attract mosquitoes and bugs that may cause diseases.

    5. Prevents ground sinking over time due to consistent water build-up throughout the years.

    6. Provides aesthetic value for landscaping purposes if installed properly in well-designed trenches around the area you are planning on installing them into.

    You May Like: What Is The Bathroom Sink Plumbing Rough In Heights

    How Does The Channel Drain Work?

    Knowing what is a channel drain, then you may want to fully understand how this type of drain pump works. Let’s see.

    It is worthy to note that you should be able to install this yourself if you are an amateur. However, it is generally advised that you seek professional help to ensure installation safety. Most channel drains are vertical with the top side facing downwards or horizontally depending on the area where they are working for. It starts by digging a trench around your yard which will require heavy equipment such as shovels and heavy-duty pickaxes. A vertical installation will also need another hole to connect it to underground piping, whereas horizontal installations already have them built into the system itself prior to burying them into the ground underneath your yard. Once both holes are dug out, all you should do is install each part together by joining them together. Use pipes and hoses, then connect everything else back together again with additional hoses – ensure proper hose and pipe fitting to prevent any leaks.

    What Are The Differences Between A Channel Drain And A French Drain?

    While both of these drain systems do what the other does, they also have notable differences as we list below:

    1. Where It Is Installed: while a channel drain is usually installed vertically in your yard facing downwards, a French drain system is most commonly used horizontally and will need an already existing hole with piping beneath it for proper installation into your yard or home.

    2. How They Work: a channel drain has multiple channels that water flows down from top to bottom, whereas a French drain uses one large tube where excess water accumulates – causing this part to fill up before the rest of the pipe empties out the excess water in the end.

    3. Purpose: channel drain is used to prevent pooling around your foundation – which may cause damage over time due to ground sinking, whereas a French drain is often installed alongside it to act as an additional line of defense when the channel part gets filled up with water and empties it out at the same time when it overflows.

    Conclusion

    By now, you should have learned what is a channel drain – along with where they are commonly used for residential homes, how they work internally, and what the benefits are of installing them into your own home. The main difference here between this type of drain pump system versus others would be that it must be installed vertically into your yard facing downwards – whereas a French drain is horizontally installed and uses one larger tube for the water to collect inside. Finally, with your newly gained knowledge of this type of drain system, you can now schedule an appointment with a professional to have them install it into your yard or home in a safe manner. If not, you can always give this a try yourself if you are brave enough.

    1 thought on “What Is A Channel Drain?”

    Leave a Comment

    Your email address will not be published.

    Social Share Buttons and Icons powered by Ultimatelysocial
    Select your currency
    USD United States (US) dollar
    EUR Euro
    Scroll to Top