Specifications of 4pcs of Bath Towel Hooks:
Material: SUS-304 stainless steel
Max Loading: 21lb
Size: 1.77x 1.18 inches
Back: Adhesive pad
Package: 4 x towel hooks
Give Your Home a New Shine
The look of self adhesive bath towel hook is designed to be simple and classic so as to become an all-match hook for fitting all kinds of your bathroom styles.
Since it is made of stainless steel material has a classic and timeless appearance, the towel hooks can be used in all kinds of places in your home, not harming the aesthetics of your decor style. They can be used in the bathroom as well as in the bedroom, in the kitchen, in the office, or on the toilet.
Strong Self Adhesive Bathroom Towel Hooks: Stick to the Wall for a Lifetime
The adhesive is made of super reliable materials and is designed to stick well to your wall for a lifetime. Equipped with a strong adhesive that can withstand any moisture, the self adhesive towel hook can guarantee you a reliable holding in spite of moist air or water in your bathroom.
It can easily hold all kinds of your stuff. When used in the bathroom, it can secure well several wet bath towels or your large heavy bathrobe.
Install without Drilling: The self adhesive bath towel hooks require no need to drill and will cause no wall surface damage. They also leave no residue on the wall even if you have to remove it.
It is easy to install too. Just peel off the film of the adhesive pad and stick it on the smooth wall surface, then press for several seconds.(not suitable for wallpaper or painted wall)
Check the how to these hooks in different spots around the house!
Installation Tips:
【1】 Clean the surface of the wall and dry it (it must be a smooth surface such as tiles, metal surfaces, glass, etc. (Not suitable for painted walls or walls).
【2】Then pull the back cover of the pad.
【3】Attach the towel hook to the smooth wall surface and press it for about 5-8 seconds.
【4】Wait 24 hours before hanging anything on it to make sure the hook is fixed tightly.
Note: Make sure the wall surface is clean and dry before installing the bath towel hook.
Removal Tips:
To remove an adhesive towel hook, you just simply use a hairdryer to heat the adhesive area.
Then use a blade to scrape the adhesive step by step and slowly remove the hook.
Lauren Norris –
These bath towel hooks have an exquisite and shiny steel look rather than a cheap plastic look like some metal hooks I bought before. Look very high-end on my tiles. I keep them next to the sink with several fresh and clean towels on them so that my guest can use it as they wish. Work great and adhere very well!
B. Pfeifer –
The design is nicely done, simple and classy look and not so kitschy.
Highly recommended! It won’t be my last buy from YIGII.
WE –
I put the hooks in the kitchen, for whisk etc.
The hooks are just great. They can be attached in a flash and are bombproof.
Really recommendable.
Christiana H. –
I’ve been searching for a long time to get hooks for handbags. The hooks are optimal because the hooks are wide enough for the straps. And they look great!
R. Caras –
I used these hooks on a mirror and they are really sturdy for hanging coats. This type of hook should be used on glass or quarts type (non-porous) surfaces. I would not use this on a painted surface or wood.
ashley green –
Its sturdiness is very good. Easy to install. No problem with adhesion. I used it in bathroom and hang the towel and clothes with no fear of detachment. I recommend it.
Taylour –
I cleaned the surface of the cabinet I wanted to stick them on with alcohol to remove any dust particles, and I peeled off the 3M backing from the hooks. As I was trying to place them, I noticed how sticky the adhesive really was.
Brittany Harrell –
I put them on and let them cure for about 24 hours before hanging anything on them. Looks great and works great. They can hold full size towels on the bathroom wall.
Tammy B. –
These are fantastic for hats, belts, coats and I use them in bedroom, bathroom for towels, doors and even near the front door for dog leashes/collars.
Grant Griffin –
Just make sure to properly clean the tile surface first and follow the isntructions. The good news is if it ever does fail on for some reason or if you messed up when sticking it, you can just get 3M adhesive. The suctions ones if they suck, they suck and you are out of luck.