How To Install Safety Bars In Tile Shower?

Many people choose to install safety bars in their bathrooms, especially if some elderly or disabled people live at home. So how to install safety bars in tile shower? When it comes to the choice of the bar, you have two options – corner safety bars and wall-mounted safety bars.

The best place to install these bars is during tiling since you can easily drill holes for the screws without worrying about breaking the grout. Your shower wall must be dry before installing bars on it because wet tiles can break more easily under stress.

how to install safety bars in tile shower

Are Safety Bars Necessary In Bathroom?

Do you always sit down when trying to use your bathroom sink? If so, it is time that you should know how to install safety bars in the tile shower. Safety bars will be necessary if one cannot stand up or sit down properly. Besides, safety bars have many benefits over having grab rails, most of which are as below:

  • Freedom – People who can still walk but have trouble sitting down without help will need the usage of safety bars. This allows them to take control of their bathroom activities with full mobility and independence.
  • Adjustable Positioning – Some people will need two or more bars to hold onto while sitting down or standing up. Safety bars can be adjusted at any height in the bathroom, even above a person’s head. It also allows a person to take advantage of different grips for different occasions.
  • Easier To Install – Grab rails usually need expert installation, making them expensive and time-consuming. However, it isn’t an issue with safety bars. You can install them yourself without too much hassle or cost involved.
  • Flexibility – Sometimes, mobility devices such as transfer benches may not always be available when needed. Safety bars can give someone support while changing clothes, exercising, and taking a bath. It even helps when no aids are around, such as family visits outside of the home and public outings that involve narrow bathrooms and limited space to move around on.
  • Comfort – Safety bars can offer a sure grip on slippery surfaces, preventing someone from falling over. This will save oneself and other people if they fall did happen. It’s all about promoting brand awareness for safety bar companies while also helping people at the same time!
  • Elegance – Many elderly homeowners like to keep their homes looking elegant instead of feeling like they’re living in hospital-like accommodations. One way to achieve this is by adding some style points with bathroom safety bars in various colors, sizes, and styles. This will enhance the overall beauty of their bathrooms while still being functional.

What’s The Standard Size Of A Grab Bar?

Grab bars provide a firm grip for people getting in and out of the shower, taking a bath, standing at the sink, or climbing stairs. Grab bars come in many sizes to accommodate different purposes and needs. This article is about how to install safety bars in tile showers for safety purposes, given that there is no standard size for these fixtures.

There are standard heights for all the bathroom accessories, such as safety bars. The length of your grab bar should be made according to your height and arm length when you stretch your arms upward (if you want to use it while standing). And choose the width depending on how much space can fit between the tub’s edge and wall, but most commonly, it’s about 4-4.5 (10-11 cm). The standard height of the grab bar is around 40-45 (101.6-114.3 cm) from the floor to the upper gripping surface.

You can buy grab bars at medical supply stores, home improvement stores, and online retailers. Installing them is fairly easy and won’t take more than a few hours with the help of your family members.

Where To Install Grab Bars?

Bathrooms are where many accidents can happen, especially if you have limited mobility. And grab bars are installed to securely hold on to while standing up from a seated position. Therefore, to ensure your safety in the bathroom, grab bars are always positioned near showers, tubs, and toilets.

The best place for a grab bar is usually located next to the faucet and right across from the toilet or tub/shower. This allows people who might need assistance to stand up without reaching too far or leaning forward too much. For an added support point, it’s also best to put two grab bars across from each other at waist level.

How To Install Safety Bars In Tile Shower?

Determine The Location

Safety bars for tile shower installation are available in many different styles. It is important first to measure the width of your tile before you purchase any safety bars. The width measurements should be taken between the inside edge of each side of the bar, where they meet at right angles.

Once you have purchased safety bars, lay them across a tiled shower floor to rest on top of the tiles. You can use an adjustable level or a carpenter’s square to make sure that the bars are level before drawing lines around them with a pencil to mark their location.

However, before installing safety bars in the tile shower, you should remove old grout from either side of where you will for safety bars installation, using a grout saw. If installing the bars along walls, make sure that they securely attach to studs behind the wall surface.

Safety bars installation in tile shower is usually easier if you first remove tiles around where the bar attaches to. Measure and mark the inside edge of the bottom of each side of your safety bar onto your tiled wall with a pencil. Draw straight lines across your tiled wall to indicate where you will cut out enough tiles to accommodate your safety bars. You can now break the tiles by hand or with small chisels until an opening is large enough for them to fit around your safety bar. It may also help at this point to use tape to cover the outside surface of your safety bar to prevent chipping and damage.

Install The Safety Bars

You should install safety bars in the corners of a tile shower for maximum stability and assistance in standing up from a bathtub or shower. To establish safety bars in the corner, you will need to make sure that your tiles are not too tight together – if they are, it can be difficult to remove tiles without causing extensive damage around where you will need for installation. Use a hammer and flathead screwdriver to gently tap lose any tiles that may be stuck along the edges near where you will need for installation. You can then re-grout these spaces after the safety bars assembly.

You should also install them on both sides of doorways to provide extra assistance when entering or exiting the area. Measure with a tape measure down from the top of each side of your doorway, noting how far it is. Take this measurement directly to your safety bars to purchase the correct size.

Conclusion

In conclusion, it is important to note that a professional should always install safety bars. If you feel that installing these bars in your home will create hazardous conditions for you or anyone else, such as when the shower floor is wet, you should wait until a professional come to install them. When building your bathroom, knowing how to install bathroom accessories is important, like how to install corner shelf in shower. Knowing more you can create your perfect bathroom.

Leave a Comment

Your email address will not be published.

Social Share Buttons and Icons powered by Ultimatelysocial
Select your currency
USD United States (US) dollar
EUR Euro
Scroll to Top