How To Hook Up A Washing Machine?

Getting that shiny new washing machine is a dream come true for many new homeowners and renters alike. It means you no longer have to mooch off family and friends or go to the laundry mat. However, if you have to replace your washing machine, you probably don’t feel quite as pleased. No matter what category you fall into, there is good news. With this helpful guide on how to hook up a washing machine, you will figure out everything you need to know.

How To Hook Up A Washing Machine
Table of Contents

    Can I Connect A Washing Machine Myself?

    Of course! It is not so hard to install a washing machine by oneself. Do you already have plumbing in your home? If you just want to replace the old washer, you can easily connect the new washer with the existing plumbing. On the contrary, if it is the first time for you to have a washing machine, you will need to build all the lines. Then you can hook up a washing machine in minutes. You will need to connect the washing machine with the following aspects:

    • Drain: The wastewater drain from the hose to the home sewage drain system.
    • Water Supply: Make sure to connect your washing machine with the right water supply.
    • Level: Remember to level the washing machine from front to back and from side to side.
    • Electrical Outlet: Most washing machines will go with ordinary 120-V household outlets.

    Can I Have A Washer Without Hookups?

    Yep! You can have a washer without hookups. It is not necessary for you to have special washer hookups. All you need is a standard 120-volt electrical outlet to plug in your washer if you live in North America. You will also need a cold water supply connection. That one is easy. You can use a portability kit to hook your bathroom sink plumbing to your washer. With these two processes, your washing machine installation is mainly finished.

    Washing Machine Need To Be Connected To — Hot Or Cold Water?

    When you are looking for how to hook up a washing machine, make sure you take note of the water temperature. When you are about to hang your clothes out, you may find that the laundry is lukewarm. So you might think it’s because the washing machine is connected to hot water. In fact, your washing machine would only be connected to the cold water. Never hook it up to Hot. The water temperate can be too hot for the valves in your washer, and it can also cause filling problems. Plus, with all the new upgrades in washers, they are more high-powered than before and can easily clean clothes in a cold water setting. It conserves energy in your home too.

    How To Install A Washing Machine?

    You can hire someone to install your washing machine or quickly finish its assembly by yourself.

    To install your washing machine, follow these 7 simple steps:

    1. Remove your old washer (if you have one).
    2. Prepare for your new washer by measuring the space.
    3. Unpack your new washer to ensure you have all the right parts.
    4. Slide your new washer into the slot and leave enough room to work behind it.
    5. Connect the water supplies hoses that came with your new washer to your home or your apartments plumbing.
    6. Set up your drain hose (details you can see below).
    7. Level your washer by placing a level on top of it and adjusting the legs. The majority of washers come with adjustable feet to level. After leveling the feet, see if the bubble of the spirit level is centered to ensure the washer is well-set.

    How To Hook Up A Washing Machine Hose?

    You can hook up your washing machine hose in a few minutes. 

    1. Locate your water supply hoses that came with your new washer, and make sure they are screwed into the washer.
    2. In most homes’ laundry rooms or closets, you will find cold water and a hot water valve inside an open box in the wall.
    3. You can screw the other end of your water supply hoes to these valves.
    4. Do not overtighten them, but use some mole grips if you can’t screw them in by hand.
    5. Make sure you have matched up the right hoses and valves.
    6. If the hose is too short, get longer replacements to prevent leaks.

    How To Install Washer Plumbing?

    Just as the bathroom exhaust fan vent into the home vent lines, you need to connect washing machine plumbing with home plumbing. Sometimes homes are not already equipped with water supply valves. You can install your washing machine to your plumbing system pretty quickly with these simple steps:

    1. Before you start, turn off the main water supply to your home to prevent leaks.
    2. Find where you want your washer to go
    3. Get to your water supply lines in that area of the house by cutting your pipes and installing a tee fitting
    4. Add pipe to the tee fitting and link back to your laundry room
    5. Put a stud out on each of the supply pipes you have brought to the washer area.
    6. Attach the stud out to the wall with some screws and put hose bibs on it.
    7. Then cut drain pipe in your house and put on a tee fitting,
    8. Connect it back to your laundry room with piping
    9. Add a 2-inch tee fitting to the drainpipe for a vent about five feet from your washer
    10. Use a P-Trap. connect a standpipe to the drain pipe.
    11. Stretch your vent pipe from a tee fitting to the attic of your house and tie it to your home’s main vent stack.

    Now you have all the answers you could ever want on how to hook up a washing machine. More detailed info you can see from:

    Leave a Comment

    Your email address will not be published. Required fields are marked *

    Social Share Buttons and Icons powered by Ultimatelysocial
    Select your currency
    USD United States (US) dollar
    EUR Euro
    Scroll to Top